|
|
radar det
#1
Posted 21 March 2004 - 04:05 PM
545i titanium grey,sports pckg,prem snd,cld wthr,black int rear air bags
#2
Posted 22 March 2004 - 11:57 AM
Please explain what it is and how it works.
replaced by BMW for
2005 SILVER GRAY 545iA SPORT PACK w/ Beige Interior. Nav, Logic 7 Sound, CWP, Comfort Seats,rear heated seats, PDC, SAT PREP & Auto rear sun shade
#3
Posted 22 March 2004 - 12:02 PM
http://www.motortrend.com/features/consume...rad/index8.html
___________________________________________________________________________________________
jhalsey
2004 545iA - Titanium Gray/Black/Anthracite
Sport, Active Cruise, Parking Control, Comfort Seats, Split Rear Seats, Cold Weather, Sirius Radio
#4
Posted 22 March 2004 - 01:32 PM
So far so good, no pulled overs but a lot of butt saves...
#5
Posted 22 March 2004 - 04:59 PM
Can you post a pic of your setup?
#6 Guest_Guest_*
Posted 22 March 2004 - 07:27 PM
is the rear sensor install....is drilling needed or can the wires be passed thru
the license plate light wells.....?
#7
Posted 23 March 2004 - 12:53 AM
thanks!
#8
Posted 23 March 2004 - 01:21 PM
2004 545iA Silver Gray, Black Dakota Leather, Sport pkg, Nav, Premium Sound pkg, Lumbar Support, 19" SSR GT3'S, H & R Springs Lemon law Bmw Buyback
#9
Posted 24 March 2004 - 06:12 AM
think your V-1 works like my Passport 8500 in that the front and
rear laser/radar sensors both need unobstructed views of the road to
pick up signals. If not I'd like to see pics of your set up so as
to try it out. :)
545i titanium grey,sports pckg,prem snd,cld wthr,black int rear air bags
#10
Posted 24 March 2004 - 12:32 PM
Tonite will take some pictures of my setup and the wire connection.
#11
Posted 24 March 2004 - 08:09 PM
installed a ZR-3?
545i titanium grey,sports pckg,prem snd,cld wthr,black int rear air bags
#12
Posted 25 March 2004 - 12:23 AM


#13
Posted 25 March 2004 - 12:29 AM

Then the rest just comes out by pulling on it. I recommend diconecting the wires from the sockets . It makes the work easier

#14
Posted 25 March 2004 - 12:32 AM
I can't see where it is, I guess that is kudos to you. Can you point out where the detector is in the pic. All I see is what looks like the rear view mirror mount. If that is the V1 that i think I see, that is a nice install.
Congrats!
Mods: Poplar Wood Shifter; Rear Reflective Inserts
#15
Posted 25 March 2004 - 12:36 AM

[B]You connect the red wire (Hot) into the green/yellow cable from the compartment. this is the one that has the juice and it is connected to the ignition on/off . Again all these parts are from my V1 kit. For other radars you could buy these adapter at Home depot or radio Shack


Help










